INSIGHTS

Moisture-sensitive products such as tablets, diagnostic test strips and certain medical devices are usually protected by a separate desiccant: a silica gel sachet or a desiccant canister placed in the bottle or carton. Svam Toyal’s DRYBLIS® takes a different route. The desiccant is not a separate piece; it is a layer inside the packaging foil itself, and the foil can be used for cold form blisters as well as sachets and strip packages.
This article compares the two approaches and explains how DRYBLIS® works in cold form blisters and in sachets for test strips.
How does a silica gel sachet work?
Silica gel is a widely used desiccant. In a typical container of tablets or test strips, a silica gel sachet or desiccant canister sits next to the product and absorbs moisture that enters the container. It protects all units together, and that protection depends on the container being closed properly after every use.
What is DRYBLIS®?
DRYBLIS® is Svam Toyal’s desiccant packaging foil, part of its ALUBLIS® cold form foil range. Svam Toyal describes it as a high-performance barrier packaging with a moisture absorption function. The foil has three functional layers:
Base film (outside): the outer layer of the laminate.
Aluminium: the moisture barrier that keeps humidity out.
Desiccant layer (inside): faces the product and absorbs moisture inside the pack.
Svam Toyal offers DRYBLIS® in 3-ply and 4-ply structures for cold form blisters, sachets and strip packages, in two types: Type Y keeps the inside absolutely dry (0% humidity) for products that are very sensitive to humidity, and Type A keeps it at 30% humidity.
DRYBLIS® in cold form blisters
DRYBLIS® is a cold form foil, so the blister cavity itself is formed from it. The aluminium keeps moisture out, while the desiccant layer lines the inside of every cavity, right next to the tablet. No separate desiccant is needed in the carton or bottle.
Moisture inside a sealed blister does not only come from outside. The air trapped during sealing carries some humidity, and the product itself can be a moisture source: industry literature lists the initial water content of the drug product among the moisture sources inside a pack, a factor that is sometimes overlooked. If the API or excipients of a tablet release moisture into the cavity after sealing, the desiccant layer absorbs it, so that moisture does not stay around the tablet.
Svam Toyal measures DRYBLIS® absorption as the drop in humidity in a closed test space starting from 25 °C and 100% relative humidity, which shows the foil working on moisture that is already inside the pack. How much moisture a product releases, and whether Type Y or Type A fits it, should be confirmed with stability studies. See our DRYBLIS® product page for both types.
Silica gel sachet vs DRYBLIS®
Topic | Silica gel sachet vs DRYBLIS® |
|---|---|
Desiccant | Silica gel: a separate sachet or canister in the container |
Protection | Silica gel: all units in the container together |
Moisture in the pack | Silica gel: absorbed once it reaches the sachet |
After opening | Silica gel: every opening lets room air reach the remaining units |
Packing line | Silica gel: an extra component to insert |
Inside the pack | Silica gel: a small loose item |
DRYBLIS® sachets for test strips
Blood glucose test strips are sensitive to humidity. The US FDA notes that heat and humidity can damage blood glucose meters and test strips. In a 2015 notice about one brand of home-use test strips, the UK MHRA asked users to close strip vials securely after use and warned that strips left exposed in high humidity may give falsely high readings.
In a shared vial, every opening lets room air in for the strips still inside. When each strip is packed in its own DRYBLIS® sachet, a strip meets room air only when its own sachet is opened, right before the test. Svam Toyal’s application example converts a bottle of 25 test strips into 25 individual DRYBLIS® sachets, to protect each strip and help keep test results reliable throughout the product’s intended shelf life.
A note on child safety
Silica gel itself is generally considered non-toxic; the Swiss poison centre Tox Info Suisse describes it as inert. The concern is rather that a desiccant sachet is a separate small item inside the pack. Because the desiccant in DRYBLIS® is part of the foil, Svam Toyal notes that a separate desiccant is unnecessary, which helps prevent accidental ingestion by children.
What to check before switching
Required humidity level: does the product need a fully dry environment (Type Y) or around 30% humidity (Type A)?
Moisture from the product: how much moisture the tablet itself can release after sealing.
Stability data: a packaging change usually needs new stability studies and an update to the product’s regulatory documentation.
Format and line: cavity or sachet size, forming and sealing, and compatibility with your packing line.
Samples and documentation: test with samples and request technical documents from the manufacturer.
Frequently asked questions
Can DRYBLIS® absorb moisture released by the tablet itself?
Yes. In a cold form blister, the desiccant layer lines the cavity and absorbs water vapour inside it, including moisture the product releases after sealing. Whether the capacity is enough for your product is confirmed with stability data.
Does DRYBLIS® replace a silica gel sachet?
The desiccant is part of the foil, so Svam Toyal states that a separate desiccant is unnecessary. Whether it fits your product is confirmed with stability data.
What is the difference between Type Y and Type A?
Type Y keeps the inside of the pack at 0% humidity for very humidity-sensitive products; Type A keeps it at 30% humidity.
Where can DRYBLIS® be used?
Svam Toyal lists cold form blisters, sachets, strip packages and electronics as applications.
Where can I source DRYBLIS® in Türkiye?
Vinder is Svam Toyal’s distributor and representative in Türkiye. Contact us for samples and technical documentation.
Sources
Svam Toyal – DRYBLIS® Sachet brochure, Version 2 (December 2023)
Packaging Strategies – A Deep Dive into Pharma Packaging Moisture Control (2018)
FDA – Medical devices that have been exposed to heat and humidity
MHRA – Regulator asks those with diabetes to store home use blood glucose test strips correctly
Get in Touch
© 1997–2026
All Rights Reserved
Contact Us
