INSIGHTS

Type I, II and III Pharmaceutical Glass: Differences and Uses

Type I, II and III Pharmaceutical Glass: Differences and Uses

Clear glass ampoules on a blue background

From the moment a medicine touches its container until its expiry date, it lives with that glass. That is why the first question in pharmaceutical packaging is not shape or volume but glass type. Pharmacopoeias classify pharmaceutical glass into three groups by its resistance to water and aqueous solutions: Type I, Type II and Type III (often written as Type 1, Type 2 and Type 3).

This article summarises how the three glass types differ, how they are tested and which medicines each one is used for.

What is hydrolytic resistance?

When glass is in long contact with a drug product, its surface can release very small amounts of alkali and other ions. The ability of glass to withstand this is called hydrolytic resistance. Glass with high hydrolytic resistance interacts less with the drug, and the glass types are defined by this property.

Type I (Type 1) glass: borosilicate

Type I glass is classically borosilicate glass. SGD Pharma describes it as “neutral in the mass”: its high hydrolytic resistance comes from the composition of the glass itself, not only from its surface.

  • According to the US Pharmacopeia (USP <660>), Type I borosilicate containers are generally used for parenteral (injectable) preparations.

  • Its low coefficient of thermal expansion gives it high resistance to temperature changes (SCHOTT).

  • Tubular glass vials, ampoules, cartridges and syringes are made from Type I borosilicate glass tubing. Type I glass can also be molded.

Type II (Type 2) glass: treated soda-lime glass

Type II glass is made of soda-lime glass whose inner surface has been treated. According to the USP, this treatment raises the hydrolytic resistance of soda-lime glass from a moderate to a high level. SGD Pharma describes Type II as “soda-lime glass with high hydrolytic surface resistance”.

  • Per the USP, acidic and neutral parenteral preparations are usually packed in Type I or Type II glass.

  • For alkaline parenteral preparations, Type II glass is used only where stability data demonstrate its suitability.

Type III (Type 3) glass: soda-lime glass

Type III glass is untreated soda-lime glass with moderate hydrolytic resistance. Per the USP, Type III containers are usually not used for parenteral preparations unless suitable stability data support it. They are considered for non-parenteral products where compatibility has been shown.

How are glass types tested?

Under USP <660>, Type I and Type III glass are classified with the Powdered Glass test, performed on crushed glass, while Type II glass is qualified with the Water Attack at 121 °C test on the inner surface of the container.

What changed in 2023?

In the revised USP <660>, official since 1 October 2023, glass types are defined by performance (hydrolytic resistance) rather than by composition. Compositions other than borosilicate can therefore qualify as Type I if they pass the tests. Test procedures and acceptance criteria did not change (ECA Academy).

Clear or amber?

Glass type and glass colour are separate questions. Glass may be coloured to protect light-sensitive drugs; per the USP, such containers must meet the light transmission requirements. SCHOTT’s amber borosilicate glass, FIOLAX® amber, provides extra protection against ultraviolet rays and short-wave visible light. In other words, Type I glass can be clear or amber.

Which product, which glass?

Product

Forming method

Glass type

Tubular vials, ampoules, cartridges, syringes (SCHOTT Pharma)

Formed from glass tubing

Type I borosilicate

Molded injection vials (SGD Pharma)

Molded

Type I, II or III

Infusion and serum bottles (SGD Pharma)

Molded

Type I, II or III

Vinder is the distributor and representative of SCHOTT Pharma and SGD Pharma in Türkiye. See our pages on tubular glass vials, glass ampoules, molded glass vials and infusion bottles.

Note: The glass type for a medicine is chosen on the basis of its formulation, stability studies and marketing authorisation dossier. This article is for general information.

Frequently asked questions

Is Type 1 glass the same as borosilicate glass?

For many years, yes: Type I glass meant borosilicate glass. The 2023 USP revision tied the definition to performance. Most Type I glass used in the pharmaceutical industry today is still borosilicate.

What is the difference between Type 2 and Type 3 glass?

Both are soda-lime glass. Type II glass has a treated inner surface and therefore high hydrolytic resistance; Type III glass has moderate resistance.

Which glass is used for injectable drugs?

Per the USP, parenteral preparations are generally packed in Type I glass. Type II glass can also be used for acidic and neutral preparations. The final decision rests on stability data.

Where can I source Type 1 glass vials in Türkiye?

Vinder supplies SCHOTT Pharma’s Type I borosilicate tubular glass vials and SGD Pharma’s Type I, II and III molded glass vials in Türkiye. Contact us for samples and technical documentation.

Sources

Contact Us